DTEN displays
DTEN Displays sind eine hervorragende Wahl für Schulen, Unternehmen und öffentliche Einrichtungen, die nach einer zuverlässigen und benutzerfreundlichen Lösung suchen, um ihre visuellen Anforderungen zu erfüllen. Diese interaktiven Displays sind in Größen von 32 bis 100 Zoll Diagonale erhältlich und bieten eine Vielzahl von Funktionen, die sie von anderen auf dem Markt erhältlichen Displays abheben.
DTEN Displays sind eine hervorragende Wahl für Schulen, Unternehmen und öffentliche Einrichtungen, die nach einer zuverlässigen, benutzerfreundlichen und vielseitigen Lösung suchen, um ihre visuellen Anforderungen zu erfüllen. Sie bieten eine robuste Konstruktion, eine intuitive Benutzeroberfläche und eine Vielzahl von Funktionen, die es den Benutzern ermöglichen, ihre Anforderungen auf einfache und effektive Weise zu erfüllen.
Filter
Filter
Resolution
Resolution:
The resolution of a projector is the maximum number of image points (pixels) that a projector can display based on its naturally existing technology, i.e. without conversion or cropping of the image. The native resolution is the number of pixels that a projector physically has to display the image. A projector usually interpolates a resolution when it receives an image signal with a higher resolution than the native one. If this is the case, there may be a lack of image detail or general blurring in the displayed image. If a projector receives an image signal with a lower resolution than the native, it also interpolates, it scales the image up to the native resolution, calculates corresponding additional pixels, if possible without changing the image information. The disadvantage here is that although the image is displayed larger than fed, the original individual pixels may become much more visible as they are multiplied by the conversion.
4K:
4K refers to the resolution of 3840 x 2160 or Ultra High Definition Television (UHDTV). This resolution corresponds to 4 times the resolution of Full HD. To record films with this resolution, special cameras are needed that can record at around 8 megapixels (4K).
Full HD:
The term Full HD is used to describe devices that can physically display or output HDTV signals in full (1920 x 1080 pixels).
1080p:
1080p is the specification of the vertical picture lines. Among other things, it refers to the resolution 1920 x 1080. The "p" in this case means full frames, so all picture lines are displayed simultaneously.
1080i:
1080i is the specification of the vertical picture lines. The "i" in this case means fields. This signal is usually displayed interpolated (e.g. by devices with a 1280 x 720 HDready resolution). The interpolation digitally adds pixels, but also offers a slight blurring. In contrast, 1080p playback uses full frames.
The resolution of a projector is the maximum number of image points (pixels) that a projector can display based on its naturally existing technology, i.e. without conversion or cropping of the image. The native resolution is the number of pixels that a projector physically has to display the image. A projector usually interpolates a resolution when it receives an image signal with a higher resolution than the native one. If this is the case, there may be a lack of image detail or general blurring in the displayed image. If a projector receives an image signal with a lower resolution than the native, it also interpolates, it scales the image up to the native resolution, calculates corresponding additional pixels, if possible without changing the image information. The disadvantage here is that although the image is displayed larger than fed, the original individual pixels may become much more visible as they are multiplied by the conversion.
4K:
4K refers to the resolution of 3840 x 2160 or Ultra High Definition Television (UHDTV). This resolution corresponds to 4 times the resolution of Full HD. To record films with this resolution, special cameras are needed that can record at around 8 megapixels (4K).
Full HD:
The term Full HD is used to describe devices that can physically display or output HDTV signals in full (1920 x 1080 pixels).
1080p:
1080p is the specification of the vertical picture lines. Among other things, it refers to the resolution 1920 x 1080. The "p" in this case means full frames, so all picture lines are displayed simultaneously.
1080i:
1080i is the specification of the vertical picture lines. The "i" in this case means fields. This signal is usually displayed interpolated (e.g. by devices with a 1280 x 720 HDready resolution). The interpolation digitally adds pixels, but also offers a slight blurring. In contrast, 1080p playback uses full frames.
Inputs
HDMI:
Digital connection for the transmission of picture & sound. Necessary for high-resolution picture quality (HDTV). Since HDMI 1.4 (High Speed) suitable for transmission of 3D content in Full HD. For high-resolution picture quality in UHD, 4K or HDR, the connection via HDMI 2.0a and higher is suitable. HDMI 2.1 or higher should be used from 120Hz refresh rate in 4K.
VGA:
The VGA connector is a 15-pin connector for analogue image transmission. It is also called DSub15 and is often found on notebooks and PCs. Compared to the other analogue connections, it offers good picture quality. It can be screwed to the input or output device and can be adapted to YUV with a suitable configuration.
DisplayPort:
The DisplayPort connection is a VESA-standardised connection for the transmission of image and sound data. In addition to HDCP encryption, DPCP is also supported. Due to its compact size, the connection is most commonly used in notebooks. An extra small variant is the MiniDisplayPort, which is used especially with Apple devices.
DVI:
DVI (Digital Visual Interface) is an interface for the transmission of video data. Only analogue signals can be transmitted via DVi-A, only digital signals via DVI-D and both types of signals via DVI-I.
USB:
USB (Universal Serial Bus) is used to control and manage the projector (USB-B). With some business devices, office files and images can also be presented directly with a USB stick or a mouse can be connected via the USB input (USB-A).
Toslink:
The Toslink connection is an optical signal connection that works on an optical fibre basis. It is used for the digital transmission of audio signals. The optical design offers a lower susceptibility to interference from external magnetic and electrical influences. The connection is mostly used in the area of DVD / Blu-ray players and comparable devices in connection with an AV receiver, if these work with dts or Dolby Digital signals.
YUV:
The YUV connection, also called Y Cb/Pb Cr/Pr or component connection, is an analogue video connection with three channels (light intensity and two colour channels). Qualitatively, it is the best analogue video connection.
Component cable:
The YUV connector transmits analogue signals over three cables (Y=black and white UV=colours). YUV is used to transmit HDTV and is compatible with Cinch, for example.
S-Video:
The S-Video connection is also called S-VHS or Hosiden connection. Compared to the Cinch video connection, it works with two channels (brightness/colour). In terms of quality, it is somewhat better than the Cinch video connection, but there are also limitations. These can be explained by the susceptibility of the signal, which is reflected in picture distortions, for example.
Cinch:
The cinch video connection is also called composite connection. To make it easier to recognise, it is usually sheathed in yellow. Since the transmission is only via one channel, the picture quality is on a low level.
D-Sub15:
The VGA connector is a 15-pin connector for image transmission on an analogue basis. It is also called DSub15 and is often found on notebooks and PCs. Compared to the other analogue connectors, it offers good picture quality. It can be screwed to the input or output device and can be adapted to YUV with a suitable configuration.
RS232:
The RS232 interface can be used to control or manage the projector.
Mini Jack:
With a single-pin Mini Jack, mono audio signals can be transmitted, with a two-pin stereo audio signals and with a three-pin stereo audio signals and image data can be transmitted.
Scart:
Scart is a connector that can be used to transmit analogue audio and video signals. It is compatible with other analogue connections such as RCA or S-Video.
ARC:
The audio return channel, also called ARC or audio return channel, was introduced with HDMI version 1.4 to reduce the amount of cabling between HDMI components. The audio return channel runs via the existing HDMI cable. Therefore, an additional cable for the sound no longer needs to be connected. However, both devices must support ARC. All audio file formats that are also transmitted via the SPDIF interface can be transmitted via the audio return channel. These include Dolby Digital, Digital Theatre Sound and PCM audio. As an example, a connection between a TV (including receiver) and an AV receiver could be made via an HDMI cable. The sound from the TV is fed back via the HDMI cable. Previously, an additional digital cable (coaxial or Tos-Link) was required for the audio signals.
Digital connection for the transmission of picture & sound. Necessary for high-resolution picture quality (HDTV). Since HDMI 1.4 (High Speed) suitable for transmission of 3D content in Full HD. For high-resolution picture quality in UHD, 4K or HDR, the connection via HDMI 2.0a and higher is suitable. HDMI 2.1 or higher should be used from 120Hz refresh rate in 4K.
VGA:
The VGA connector is a 15-pin connector for analogue image transmission. It is also called DSub15 and is often found on notebooks and PCs. Compared to the other analogue connections, it offers good picture quality. It can be screwed to the input or output device and can be adapted to YUV with a suitable configuration.
DisplayPort:
The DisplayPort connection is a VESA-standardised connection for the transmission of image and sound data. In addition to HDCP encryption, DPCP is also supported. Due to its compact size, the connection is most commonly used in notebooks. An extra small variant is the MiniDisplayPort, which is used especially with Apple devices.
DVI:
DVI (Digital Visual Interface) is an interface for the transmission of video data. Only analogue signals can be transmitted via DVi-A, only digital signals via DVI-D and both types of signals via DVI-I.
USB:
USB (Universal Serial Bus) is used to control and manage the projector (USB-B). With some business devices, office files and images can also be presented directly with a USB stick or a mouse can be connected via the USB input (USB-A).
Toslink:
The Toslink connection is an optical signal connection that works on an optical fibre basis. It is used for the digital transmission of audio signals. The optical design offers a lower susceptibility to interference from external magnetic and electrical influences. The connection is mostly used in the area of DVD / Blu-ray players and comparable devices in connection with an AV receiver, if these work with dts or Dolby Digital signals.
YUV:
The YUV connection, also called Y Cb/Pb Cr/Pr or component connection, is an analogue video connection with three channels (light intensity and two colour channels). Qualitatively, it is the best analogue video connection.
Component cable:
The YUV connector transmits analogue signals over three cables (Y=black and white UV=colours). YUV is used to transmit HDTV and is compatible with Cinch, for example.
S-Video:
The S-Video connection is also called S-VHS or Hosiden connection. Compared to the Cinch video connection, it works with two channels (brightness/colour). In terms of quality, it is somewhat better than the Cinch video connection, but there are also limitations. These can be explained by the susceptibility of the signal, which is reflected in picture distortions, for example.
Cinch:
The cinch video connection is also called composite connection. To make it easier to recognise, it is usually sheathed in yellow. Since the transmission is only via one channel, the picture quality is on a low level.
D-Sub15:
The VGA connector is a 15-pin connector for image transmission on an analogue basis. It is also called DSub15 and is often found on notebooks and PCs. Compared to the other analogue connectors, it offers good picture quality. It can be screwed to the input or output device and can be adapted to YUV with a suitable configuration.
RS232:
The RS232 interface can be used to control or manage the projector.
Mini Jack:
With a single-pin Mini Jack, mono audio signals can be transmitted, with a two-pin stereo audio signals and with a three-pin stereo audio signals and image data can be transmitted.
Scart:
Scart is a connector that can be used to transmit analogue audio and video signals. It is compatible with other analogue connections such as RCA or S-Video.
ARC:
The audio return channel, also called ARC or audio return channel, was introduced with HDMI version 1.4 to reduce the amount of cabling between HDMI components. The audio return channel runs via the existing HDMI cable. Therefore, an additional cable for the sound no longer needs to be connected. However, both devices must support ARC. All audio file formats that are also transmitted via the SPDIF interface can be transmitted via the audio return channel. These include Dolby Digital, Digital Theatre Sound and PCM audio. As an example, a connection between a TV (including receiver) and an AV receiver could be made via an HDMI cable. The sound from the TV is fed back via the HDMI cable. Previously, an additional digital cable (coaxial or Tos-Link) was required for the audio signals.
- Products
- Projectors
- Projection screens
- Displays
- Displays
- Displays by application
- Displays by size
- Displays by brand
- Samsung displays
- Viewsonic displays
- Sony displays
- LG displays
- iiyama displays
- NEC displays
- Philips displays
- Sharp displays
- i3 displays
- BenQ displays
- DynaScan displays
- DTEN displays
- Kindermann displays
- Newline displays
- Swedx displays
- Panasonic displays
- Infocus displays
- ELO Touch displays
- Hisense displays
- Display holder systems
- Display accessories
- VR glasses
- Interactive Touch Displays
- Monitors
- LED Walls
- Connectivity
- Mounting systems
- Video conferencing systems
- Headsets
- Visualisers
- Audio
- Boards & Furniture
- Accessories
- Solutions
- On-site services
- Guide & News
- Contact
6 Products
Sort by:
In dieser Kategorie präsentieren wir Ihnen DTen Displays, die eine bahnbrechende Technologie bieten, um Ihnen ein neues Erlebnis in Sachen Bildschirm-Displays zu bieten. DTen Displays sind die neueste Generation von Display-Technologie, die mit ihrer hervorragenden Qualität und innovativen Funktionen den Standard erhöhen. Unsere DTen Displays sind in verschiedenen Größen und Varianten erhältlich, darunter interaktive Displays, Signage-Displays und Standalone-Displays. Mit Bildschirmdiagonalen von 32 bis 100 Zoll bieten wir Ihnen eine große Auswahl an Display-Größen, die sich perfekt für Ihre Bedürfnisse eignen.
Es ist schwer zu sagen, welches DTen Display das Richtige für Sie ist, aber wenn Sie nach einem Display suchen, das ein unvergessliches Erlebnis bietet, sind Sie bei uns genau richtig. Wir bieten Ihnen die Möglichkeit, die interaktiven Displays von DTen zu erleben, die eine Multi-Touch-Oberfläche und eine Vielzahl von Eingabeoptionen bieten. Unsere Signage-Displays sind perfekt für Werbung oder Informationsdisplays, und unsere Standalone-Displays bieten Ihnen eine hervorragende Bildqualität.
Für Meetingräume empfehlen wir Ihnen unsere DTen Meetingraum-Displays, die eine benutzerfreundliche Oberfläche und eine hervorragende Audio- und Videoqualität bieten. Diese Displays sind speziell für Konferenzräume entwickelt worden und bieten eine nahtlose Integration in Ihr bestehendes System.
Für Klassenräume empfehlen wir Ihnen unsere DTen E-Signatur-Displays, die mit einer fortschrittlichen Technologie ausgestattet sind und eine hervorragende Bild- und Tonqualität bieten. Diese Displays sind perfekt für den Einsatz im Bildungsbereich und bieten den Schülern ein interaktives Lernumfeld.
Unsere Serviceleistungen beinhalten auch einen Montageservice und einen Lieferservice. Wir wissen, dass die Installation eines neuen Displays eine Herausforderung sein kann, deshalb bieten wir Ihnen eine einfache Lösung, um sicherzustellen, dass Ihr neues Display schnell und einfach installiert wird. Unser Lieferservice sorgt dafür, dass Ihr neues DTen Display schnell und sicher bei Ihnen ankommt.
Wir bieten auch eine große Auswahl an passendem DTen Display-Zubehör an, damit Sie das Beste aus Ihrem Display herausholen können. Unsere Zubehörartikel umfassen Wandhalterungen, Kabel, Adapter und vieles mehr. DTen Displays bieten eine hervorragende Bildqualität, innovative Funktionen und sind perfekt für jeden Raum geeignet, ob in der Schule, im Büro oder zu Hause. Unser Audio- und Visueller Onlineshop ist stolz darauf, Ihnen eine breite Palette an Produkten