celexon Ceiling Recessed Electric Professional Plus Projector Screen 160 x 90 cm

Frequently purchased together

12 V Trigger Kit for celexon Expert series

12-Volt-Trigger-Kit-voor-celexon-Expert-serie

£124.99*

celexon IR remote control and wall box for celexon Economy/Professional series

celexon-ir-afstandbediening-incl-wandschakelaar-voor-celexon-economy-professional-serie

£59.99*

Celexon Professional 1-Channel Radio Remote Set

celexon-professional-1-kanaals-radiografische-set

£99.99*

Celexon Professional 2-Channel Radio Remote Set

celexon-professional-2-kanaals-radiografische-set

£174.99*

Celexon Professional Radio Trigger

celexon-professional-radiografische-trigger

£64.99*

BenQ TH671ST Projector, 1920 x 1080 Full HD, 3,000 ANSI Lumen

£668.50*

Epson EB-FH52 - Full 1080p HD, 4000 lumen projector with integrated WiFi

£615.47*

Acer Acer H6536BD Projectors 4,000

Product information

The new celexon ceiling recessed screen electric Professional Plus is the latest addition to our popular professional ceiling recessed range. The aluminum housing fits discreetly into your space and the weighted bar provides a flush finish to the ceiling offering an elegant, unobtrusive finish.

With widths ranging from 160 cm to 300 cm available in four different formats, there is a large selection with the right solution for your requirements. With a gain factor of 1.2, the screen is optimally used in conference or meeting rooms as well as in your high-quality home cinema.

The projection screen is fabric type D, with a wide viewing angle and suitable for high-resolution 4K content.

Key Information:

160 x 90 cm white usable viewing area
Aspect ratio 16:9
Ceiling cut-out: 202 x 11 cm (LxW)
Quiet motor drive
45cm black drop above
Variable, stepless adjustment of the screen height up to max.100cm
3-ply coated projection cloth is ideal for high-resolution 4K content
Type D cloth with 1.2 gain and 150° viewing angle
Black edge masking left, right and below the screen
Black back
Including pre-assembled push button for installation control, optional radio or IR systems available
Wedge-shaped weighted bar that finishes flush with the housing when closed.

The celexon ceiling recessed screen electric professional plus has a matt white, black backed projection screen fabric, which due to the special surface structure is ideally suited for displaying high-resolution images. The black edge masking frames the image accurately and thus increases the overall contrast.
The screen is already pre-assembled, so that the installation effort on site is kept to a minimum. The screen is suspended from the ceiling with four threaded rods and can be adjusted to the nearest millimeter. The side covers ensure a flush and clean finish to your ceiling cutout.

Please note: The push button integrated in the cable is used to put the screen into operation and can be replaced by the customer as required. To use external controls (wall switch, media control etc), the switch must be disassembled and the 4-core cable connected to the control system accordingly. This gives you the maximum flexibility for integration into your system or room.

Delivery:

celexon ceiling recessed screen electric Professional Plus, pre-assembled incl. push-button switch and power plug
4x 100cm threaded rods
2x mounting bracket for ceiling
2 x cover caps
Mounting accessories for solid ceilings
Operation manual

Technical data

Name	celexon Ceiling Recessed Electric Professional Plus Projector Screen 160 x 90 cm
Article number	1000000875
GTIN/EAN	4260094737909
Manufacturer SKU	1000000875
Model name	1000000875
Projection Distance	Long Throw , Short Throw
Brand	celexon
Product Type	Projection screen
Product Series	celexon Ceiling recessed professional Plus
Screen type	Ceiling recessed , Electric
Technology	Front projection
Screen fabric	matt white polyester
Aspect Ratio	16:9 Aspect Ratio Format: The projected image is output in a format (aspect ratio) specified by the projector. The format is also determined by the resolution of the projector (see also the entry "Resolution"). The screen format is usually selected on the basis of the format of the beamer image. The most common formats are 4:3, 16:9 and 16:10.
Viewable Area - Width	160 cm Viewable Area - Width Visible surface: The usable surface of a screen is the coated part of the cloth on which the image is projected. The frame and box width are always a few centimetres wider than the usable surface of the screen.
Viewable Area - Height	90 cm Viewable Area - Height Visible surface: The usable surface of a screen is the coated part of the cloth on which the image is projected. The frame and box width are always a few centimetres wider than the usable surface of the screen. Leader: The leader or offset is the part above the screen. This allows the upper vertical area of the fabric of a roller screen to be limited and freely determined within certain limits. The leading edge prevents the visible area of the screen from being set too high when a screen is positioned in rooms with high ceilings.
Black border - Top	45 cm Black border - Top Masking: The black border of a canvas is called masking. It provides an increase in contrast to the actually visible image and is also responsible for delimiting the edge of the image. The masking can be fixed or variable, for example to switch to a different format.
Black borders - Left/Right	3 cm Black borders - Left/Right Masking: The black border of a canvas is called masking. It provides an increase in contrast to the actually visible image and is also responsible for delimiting the edge of the image. The masking can be fixed or variable, for example to switch to a different format.
Black border - bottom	3 cm Black border - bottom Masking: The black border of a canvas is called masking. It provides an increase in contrast to the actually visible image and is also responsible for delimiting the edge of the image. The masking can be fixed or variable, for example to switch to a different format.
Gain factor	1.2 Gain factor Gain factor: The gain factor (or also called gain) is used to assess the reflection behaviour of screens and describes the light gain achieved in contrast to the brightness of the projector. A gain factor of 1.2 indicates that a screen reflects 1.2 times more in a given direction than a defined white standard surface. The gain factor is always given for the straight viewing angle of 0 degrees. Hot spot: A hot spot is a brightening in the centre of the image on a screen. These disturbing artefacts are created by the direct visibility of the projector lamp and only occur on screens with a very high gain factor (1.8 to 2.0).
Mount type	Ceiling
Features	Black backing
Certificates	B1 flame retradent
Product width	206.6 cm
Product height	10.3 cm
Product depth	13.6 cm
Weight	12.03 kg
Colour	White
Condition	New
Warranty	24 Month
Warranty type	Bringin service Service and support information

Manufacturer's warranty information:
Here you will find more detailed information on the different types of warranty. Please refer to our manufacturer overview for contact details and warranty conditions for the corresponding warranty claim. Statutory warranty rights are not restricted by an additional manufacturer's warranty. Our liability for defects is governed by law. Defect rights can be claimed free of charge.

Downloads