DELUXX Cinema Electric Screen Tension 298 x 168 cm, 135" - 4k Pro Fibre MWHT

Product information

DELUXX Cinema Electric Projector screen Tension 177 x 99 cm, 80" - 4k Pro Fibre MWHT

With the DELUXX 4k Pro Fibre MWHT Tension you get a high-quality, motorised screen with a high level of connection & operating versatility in an attractive matt white housing that is unobtrusive for every living room and home cinema. The Screen fabric is based on fibreglass and is more temperature-stable than pure PVC or Vinyl fabric and can therefore also be used in temperature-critical areas (please refer to the enclosed instructions)

DELUXX has created an extremely fine surface structure on the 4k Pro Fibre cloth which is also suitable for 8K projections. Having this future standard also covered with the robust fibreglass fabric ensures you get long-term enjoyment guaranteed. A very homogeneous image reflection with a wide viewing angle makes this Screen of "TYPE D" (diffuse reflective) the ultimate choice for projection and the gain of 1.0 brightens slightly without distorting colour values.

The lateral cable tension enables a very good flatness and can be infinitely readjusted on each side if required. This helps you to avoid "dog-ears" in the projection area.

The DELUXX Cinema Tension electric screen - 4K Pro Fibre is supplied with an extensive range of accessories and can be controlled in a variety of ways: wireless radio and IR remote control are included, but also the wireless integration into your Logitech remote control (codes are stored at Logitech) is no problem. There is also a 5V-20V trigger input (screen moves down/up automatically when the projector is on/off automatically down/up) as well as professional integration via RS232/RS485 into Systems from e.g. Crestron or RTI, as well as potential-free contacts available. The choice is yours!

Screen fabric:

Visible projection surface: 177 x 99 cm, (80")
1.0 gain 4K Pro Fibre technology with the finest surface structure also suitable for 8K
Wide viewing angle of over 150° and suitable for short and long throw projectors (not UST)
Extremely fine fabric structure: suitable for 8K
Wide 150 degree viewing angle
Black masking 5cm left, right and bottom, 66cm black leading at the top
Black leader adapted to the format
Dimensionally stable & rigid Screw winding shaft with a large diameter for optimum flatness and Freedom from streaks

Mounting and design:

Matt white aluminium screen housing in a discreet design
Intelligent, unobtrusive & flexible mounting kit for wall or ceiling installation incl. drilling template
Easy installation and plug & play connection Power cable via IEC connector
Special, lateral tension system straightens out "dog-ears"
Very quiet DELUXX quality tubular motor: durable and smooth-running
Casing dimensions: 343.4 x 10.85 x 10.3 cm (LxHxW), 19kg

Certifications:
ROHS, REACH, CE - 2014/53/EU

Control of the screen included in the scope of delivery:
- Integrated radio receiver + separate infrared receiver with remote controls
- side buttons on the housing with 3 functions: Up, stop and down
- Trigger: 5V-20V (AC/DC)
- RJ12 (RS232/RS485 protocol) connection for RTI, Crestron, Control4 etc.
- potential-free contacts via RJ12, relay controllable

Scope of delivery:
- DELUXX cable tensioning motorised screen with "DELUXX 4k Pro Fibre Matt white" fabric
- Cloth: Type D, matt white, luminance factor according to DIN19045 approx. 1.2
- Cold appliance cable in white
- RF remote control
- IR remote control
- 5m trigger cable
- IR receiver eye
- Wall/ceiling mounting bracket
- Drilling template for perfect installation
- Instructions & screen handling instructions
- still required: batteries 3x CR2032

Technical data

Name	DELUXX Cinema Electric Screen Tension 298 x 168 cm, 135" - 4k Pro Fibre MWHT
Article number	1000004616
GTIN/EAN	4250064999772
Manufacturer SKU	1000004616
Model name	1000004616
Projection Distance	Long Throw , Short Throw
Brand	DELUXX
Product Type	Projection screen
Product Series	DELUXX Cinema 4K Pro Fibre Series
Screen type	Electric , Tab tension screen
Technology	Front projection
Screen fabric	matt white fibre
Aspect Ratio	16:9 Aspect Ratio Format: The projected image is output in a format (aspect ratio) specified by the projector. The format is also determined by the resolution of the projector (see also the entry "Resolution"). The screen format is usually selected on the basis of the format of the beamer image. The most common formats are 4:3, 16:9 and 16:10.
Viewable Area - Width	298 cm Viewable Area - Width Visible surface: The usable surface of a screen is the coated part of the cloth on which the image is projected. The frame and box width are always a few centimetres wider than the usable surface of the screen.
Viewable Area - Height	168 cm Viewable Area - Height Visible surface: The usable surface of a screen is the coated part of the cloth on which the image is projected. The frame and box width are always a few centimetres wider than the usable surface of the screen. Leader: The leader or offset is the part above the screen. This allows the upper vertical area of the fabric of a roller screen to be limited and freely determined within certain limits. The leading edge prevents the visible area of the screen from being set too high when a screen is positioned in rooms with high ceilings.
Black border - Top	13 cm Black border - Top Masking: The black border of a canvas is called masking. It provides an increase in contrast to the actually visible image and is also responsible for delimiting the edge of the image. The masking can be fixed or variable, for example to switch to a different format.
Black borders - Left/Right	5 cm Black borders - Left/Right Masking: The black border of a canvas is called masking. It provides an increase in contrast to the actually visible image and is also responsible for delimiting the edge of the image. The masking can be fixed or variable, for example to switch to a different format.
Black border - bottom	5 cm Black border - bottom Masking: The black border of a canvas is called masking. It provides an increase in contrast to the actually visible image and is also responsible for delimiting the edge of the image. The masking can be fixed or variable, for example to switch to a different format.
Gain factor	1 Gain factor Gain factor: The gain factor (or also called gain) is used to assess the reflection behaviour of screens and describes the light gain achieved in contrast to the brightness of the projector. A gain factor of 1.2 indicates that a screen reflects 1.2 times more in a given direction than a defined white standard surface. The gain factor is always given for the straight viewing angle of 0 degrees. Hot spot: A hot spot is a brightening in the centre of the image on a screen. These disturbing artefacts are created by the direct visibility of the projector lamp and only occur on screens with a very high gain factor (1.8 to 2.0).
Viewing angle - Horizontal	160° Viewing angle - Horizontal Viewing angle: The viewing angle indicates the distance from the centre line at which the projected image is perceived as being of good quality without restrictions. As a rule, the horizontal viewing angle is specified. A good viewing angle lies within a range of 110 to 130 degrees from the centre of the picture, i.e. 55 to 65 degrees to the left and 65 to the right. If you are outside the viewing angle, the picture deteriorates disproportionately.
Mount type	Ceiling , Wall
Features	Black backing
Product width	344 cm
Product height	10.3 cm
Product depth	9.5 cm
Weight	19 kg
Colour	White
Delivery contents	Power cable , Quick user guide , Remote control
Condition	New
Warranty	24 Month
Warranty type	Bringin service Service and support information

Manufacturer's warranty information:
Here you will find more detailed information on the different types of warranty. Please refer to our manufacturer overview for contact details and warranty conditions for the corresponding warranty claim. Statutory warranty rights are not restricted by an additional manufacturer's warranty. Our liability for defects is governed by law. Defect rights can be claimed free of charge.

Downloads

Safety instructions and warnings - PDF

(PDF 897.4 kB)

Product safety

Person responsible for the EU
celexon Europe GmbH
Gutenbergstraße 2
48282 Emsdetten
Germany


info@celexon.de

Product information

Safety instructions and warnings - PDF

(PDF 897.4 kB)