DELUXX Cinema Electric Screen Elegance 16:9 Matt White Varico Flat 274 x 154 cm

Product information

The DELUXX Cinema electric screen Elegance is characterized by crisp lines and a round profile. The screen is designed for home use where aesthetics is key.

The elegant appearance does not mean less performance - equipped with Somfy motors and professional projection screens surrounded by a shapely aluminium housing, the DELUXX Cinema electric Screen Elegance meets the highest standards.

The PVC projection screen has a diffuse coating (type D) and, with its matt white surface, offers very good colour reproduction and the best flatness right down to the edges. The fabric offers Fire protection to the M1 & B1 standard.

The sophisticated mounting system gives you the opportunity to freely position the enclosed wall / ceiling mounting brackets (metal) along the housing, thus making installation easier.

Key Information:

274 x 154 cm visible area
5cm black border left, right
5cm black edge below
50cm black drop
No black back
PVC projection cloth with 1.2 gain at 120 ° viewing angle
Elegant housing made of aluminium, painted white
Metal freely positionable wall or ceiling mounting brackets
Power connection: left (viewed from the front)
Incl. up and down switch
Quiet and smooth Somfymotor
Fire protection M1 & B1

In the box you will find the screen, mounting brackets, instructions and an up / down switch (not pre-wired).

On request, you can buy the screen with integrated receiver & remote control, which can visually enhance the installation, but the possibility of other control system (such as triggers, external switches, etc.) is then prevented.

Technical data

Name	DELUXX Cinema Electric Screen Elegance 16:9 Matt White Varico Flat 274 x 154 cm
Article number	3610087
GTIN/EAN	4250064913853
Manufacturer SKU	11385
Projection Distance	Long Throw , Short Throw
Brand	DELUXX
Product Type	Projection screen
Screen type	Electric
Technology	Front projection
Aspect Ratio	16:9 Aspect Ratio Format: The projected image is output in a format (aspect ratio) specified by the projector. The format is also determined by the resolution of the projector (see also the entry "Resolution"). The screen format is usually selected on the basis of the format of the beamer image. The most common formats are 4:3, 16:9 and 16:10.
Viewable Area - Width	274 cm Viewable Area - Width Visible surface: The usable surface of a screen is the coated part of the cloth on which the image is projected. The frame and box width are always a few centimetres wider than the usable surface of the screen.
Viewable Area - Height	154 cm Viewable Area - Height Visible surface: The usable surface of a screen is the coated part of the cloth on which the image is projected. The frame and box width are always a few centimetres wider than the usable surface of the screen. Leader: The leader or offset is the part above the screen. This allows the upper vertical area of the fabric of a roller screen to be limited and freely determined within certain limits. The leading edge prevents the visible area of the screen from being set too high when a screen is positioned in rooms with high ceilings.
Black border - Top	50 cm Black border - Top Masking: The black border of a canvas is called masking. It provides an increase in contrast to the actually visible image and is also responsible for delimiting the edge of the image. The masking can be fixed or variable, for example to switch to a different format.
Black borders - Left/Right	50 cm Black borders - Left/Right Masking: The black border of a canvas is called masking. It provides an increase in contrast to the actually visible image and is also responsible for delimiting the edge of the image. The masking can be fixed or variable, for example to switch to a different format.
Black border - bottom	5 cm Black border - bottom Masking: The black border of a canvas is called masking. It provides an increase in contrast to the actually visible image and is also responsible for delimiting the edge of the image. The masking can be fixed or variable, for example to switch to a different format.
Gain factor	1.2 Gain factor Gain factor: The gain factor (or also called gain) is used to assess the reflection behaviour of screens and describes the light gain achieved in contrast to the brightness of the projector. A gain factor of 1.2 indicates that a screen reflects 1.2 times more in a given direction than a defined white standard surface. The gain factor is always given for the straight viewing angle of 0 degrees. Hot spot: A hot spot is a brightening in the centre of the image on a screen. These disturbing artefacts are created by the direct visibility of the projector lamp and only occur on screens with a very high gain factor (1.8 to 2.0).
Viewing angle - Horizontal	120° Viewing angle - Horizontal Viewing angle: The viewing angle indicates the distance from the centre line at which the projected image is perceived as being of good quality without restrictions. As a rule, the horizontal viewing angle is specified. A good viewing angle lies within a range of 110 to 130 degrees from the centre of the picture, i.e. 55 to 65 degrees to the left and 65 to the right. If you are outside the viewing angle, the picture deteriorates disproportionately.
Mount type	Ceiling , Wall
Minimum Projection Ratio	169 Minimum Projection Ratio Projection ratio: The projection ratio indicates at which projection distance a corresponding image width is achieved. This value depends on the lens installed.Example 1 - Calculating the distance: Projection ratio 1.4-1.8:1 Desired image width = 300cm Result: 420 - 540 cm distance (300 x 1.4 or 1.8). Example 2 - Calculation of possible image widths: Projection ratio 1.4-1.8:1 Projection distance = 560cm Result: 311 - 400cm image width (560 / 1.4 or 1.8).
Maximum Projection Ratio	169 Maximum Projection Ratio Projection ratio: The projection ratio indicates at which projection distance a corresponding image width is achieved. This value depends on the lens installed.Example 1 - Calculating the distance: Projection ratio 1.4-1.8:1 Desired image width = 300cm Result: 420 - 540 cm distance (300 x 1.4 or 1.8). Example 2 - Calculation of possible image widths: Projection ratio 1.4-1.8:1 Projection distance = 560cm Result: 311 - 400cm image width (560 / 1.4 or 1.8).
Product width	274 cm
Product height	154 cm
Weight	23 kg
Condition	New
Warranty	24 Month
Warranty type	Bringin service Service and support information

Manufacturer's warranty information:
Here you will find more detailed information on the different types of warranty. Please refer to our manufacturer overview for contact details and warranty conditions for the corresponding warranty claim. Statutory warranty rights are not restricted by an additional manufacturer's warranty. Our liability for defects is governed by law. Defect rights can be claimed free of charge.

Downloads

Safety instructions and warnings - PDF

(PDF 897.4 kB)

Product safety

Person responsible for the EU
celexon Europe GmbH
Gutenbergstraße 2
48282 Emsdetten
Germany


info@celexon.de

Product information

Safety instructions and warnings - PDF

(PDF 897.4 kB)