Kramer PT-571HDCP DVI-CAT transmitter (1x DVI to 1x CAT)

The PT-571HDCP is a DGKat™ twisted pair transformer for DVI signals.

The PT-571HDCP converts a DVI signal into a twisted pair signal, the PT-572HDCP+ converts the incoming twisted pair signal back into a DVI signal.

• Max. Data rate - 1.65 Gbps
• HDTV compatible
• HDCP compliant
• DGKat™ signal integration - Kramer's unique technology to convert TMDS, control and communication into signals for twisted pair transmissions. For optimum performance, we strongly recommend using Kramer's DGKat™ cables.
• System range - Up to 90 m for SXGA or up to 30 m for UXGA with shielded BC-DGKat524 cables; up to 90 m for SXGA or up to 70 m for UXGA with shielded BC-DGKat623 cables; up to 100 m for SXGA or up to 80 m for UXGA with shielded BC-DGKat7a23 cables
• Cables - Shielded twisted pair (STP) cables are required. For optimum range and performance, use Kramer's BC-DGKat524, BC-DGKat623, BC-DGKat7a23 cables. The transmission range depends on the resolution, the graphics card and the display used, among other things. The transmission range may be less than specified when using CAT 5 / CAT 6 / CAT 7 cables that are not part of our product range. Only use cables with both ends of the shield connected to ground.
• EDID pass-through - Enables EDID communication between source and display.
• Power Connect™ System - The PT-571HDCP and PT-572HDCP+ system is powered either via the mains connection of the transmitter or the receiver.
• Ultra-compact Pico TOOL™ - Four devices can be mounted side by side in a 19-inch rack on 1 U using the optional RK-4PT rack adapter.

Typical applications:

• Conference and training rooms
• Presentation systems
• Signal distribution and home cinema