Panasonic TH-86SQ2HW 86" Display

Product information

Breathtaking 4K quality from Panasonic: brilliance down to the smallest detail

With a high resolution of around 8,290,000 pixels - four times that of a Full HD display - extremely detailed images are delivered. This dynamic large-screen display archives lifelike, finely nuanced images. The 4K display is an excellent choice for meeting rooms where images are often viewed up close and creates an impressive ambience in signage applications for commercial facilities. It is expected to attract considerable attention.

A clear display of images even in brightly lit locations

The SQ2H series has a brightness of 700 cd/m² and therefore delivers significantly brighter images than a conventional 4K display.

Ultra-high-resolution 4K displays from the "SQ2H" series with a brightness of 700 cd/m² provide strong visibility even in bright conditions and deliver significantly brighter images than a conventional display.

Even next to a window, these displays can be used effectively to share information in a classroom or conference room, and are well suited for in-store digital signage placed in well-lit areas.

Best readable panel surface finish

The SQ2H series uses a panel with anti-glare (AG) processing, which utilises the concave/convex surface to diffuse light from the sun and lighting equipment. As it suppresses external reflections to ensure better readability, it is ideal for use in conference rooms and lecture theatres.

High reliability enables continuous 24/7 operation

The SQ2H series is capable of continuous 24/7 operation. It offers reliable use in public spaces where many people gather, such as train stations, airports and shopping centres, as well as for installation in control rooms.

Customised installation for every application

Large selection of 98- to 43-inch models to suit your space, from small corners such as a meeting room to the main display in a conference room. It can also be installed tilted forward at an angle of up to 20 degrees to ensure good readability when mounted in a high position.

Support of the new Intel® SDM slot standard

The SQ2H series is equipped with the Intel® SDM specification slot standard, which supports 4K signals. In combination with the interface board, you can easily use a built-in PC and add various interfaces.

Numerous terminals allow connection to various devices

Equipped with HDMI inputs (x 3), PC-™ and USB Type-C video inputs. Depending on the operating environment, various video contents can be displayed by connecting external devices. When the SQ2H series is connected to a PC via USB Type-C, up to 60W of power can be delivered to the PC.

Supports LAN control connection

The SQ2H series can be controlled via LAN or serial. Simultaneous control and centralised management can be carried out via a network. It is also compatible with AMX, Crestron Connected™ and Crestron XiO Cloud™.

Screen transfer function that allows you to distribute images to displays in every classroom and conference room

Compatible with Screen Transfer version 2.3 software, which displays the PC screen on up to 64 displays via wired LAN.

Distribute headmaster or teacher presentations and in-house training status to multiple classrooms and conference rooms and confirm distribution status from one PC.

With the priority distribution function, you can distribute images in the wrong order or switch on the device automatically so that you can distribute messages in an emergency.

Enables writing on the screen

The SQ2H series is equipped with a whiteboard function. By setting the USB receiver of the mouse on the display, you can write on the screen with the mouse and zoom in and out. This is useful for facilitating efficient meetings.

USB pass-through function to save time and effort when preparing for meetings

USB devices connected via USB Type-A can be controlled from a PC that is connected to the display via USB Type-C. If USB devices such as cameras, speakers and microphones are permanently installed in the conference room, simply connect the USB Type-C cable to the PC to start the meeting immediately.

Dynamic signage possible with portrait zoom

Separate content from image sources and enlarge the display in portrait mode. No special devices, such as processors, are required to create content from different images. By placing three SQ2H models vertically, a display equivalent to 112 inches is created. This enables highly visible shop signage.

The display has an integrated 4K-compatible USB media player

When a USB stick with stored content is inserted, playback starts automatically. Thanks to 4K compatibility, digital signage in 4K quality can also be realised without a PC or set-top box. It can be played back without interrupting marker areas and black images. Content can also be switched via LAN or multiple displays can be operated.

PC software enables even easier and more convenient playback and management of content

The SQ2H series has a USB media player function that enables easy playback of signage. Content Management Software is an application software for programming the playback of digital signage on a computer. It also allows you to set Poser ON/OFF.

Automatic content playback with scheduling function

Content Management Software for PC version 3.2 (free) allows you to easily create playlists with media support, including combinations of still and video images. You can set up schedules to play and stop your media playlist at predefined dates and times.

Easy synchronisation of playlists and schedules

Playlists and schedules created with the content management software can be transferred to the displays via USB memory or LAN. Synchronised playback on multiple screens is also supported.

Technical data

Name	Panasonic TH-86SQ2HW 86" Display
Article number	1000031671
GTIN/EAN	4010869317191
Manufacturer SKU	TH-86SQ2HW
Model name	TH-86SQ2HW
Brand	Panasonic
Product Type	Non-Touch Display
Technology	LCD Technology LED: LED is a lighting technology. With LED technology, diodes are used as illuminants and not conventional UHP lamps. The advantage of this technology is that the diodes do not use a filament and practically do not consume energy. However, LEDs have a more bluish colour range than UHP lamps, which is why the image is often perceived as somewhat colder. Colour wheel: Besides the DMD chip, the colour wheel is one of the most important criteria for image generation in DLP projectors. The colour wheel rotates constantly at extremely high speed and currently has 3, 4, 5 or, in some cases, even more colour segments. Through the colour wheel, the light from the projector lamp is alternately broken down into the primary colours red, green and blue practically without interruption. In modern projectors, the colour wheel also contains white and sometimes other colours such as cyan, magenta and yellow. With 3 segments, the colour wheel rotates at 3600 or 7200 rpm, with 7 segments at up to 14400 rpm. (4x speed). Each colour perceived by the eye in a DLP projector is therefore an extremely fast sequence of individual, differently coloured light beams until the actual processing. Because this technology sometimes does not use all the colour positions of the colour wheel for high-contrast images, or because the colours required for colour mixing are arranged far apart on the wheel, some viewers recognise the rainbow effect. This characteristic is more noticeable with slower colour wheels and slower rotation speeds than with projectors with faster and more frequently segmented colour wheels.
panel technology	VA
backlight	Direct-LED
Resolution	3840 x 2160 4K UHD Resolution Resolution: The resolution of a projector is the maximum number of image points (pixels) that a projector can display based on its naturally existing technology, i.e. without conversion or cropping of the image. The native resolution is the number of pixels that a projector physically has to display the image. A projector usually interpolates a resolution when it receives an image signal with a higher resolution than the native one. If this is the case, there may be a lack of image detail or general blurring in the displayed image. If a projector receives an image signal with a lower resolution than the native, it also interpolates, it scales the image up to the native resolution, calculates corresponding additional pixels, if possible without changing the image information. The disadvantage here is that although the image is displayed larger than fed, the original individual pixels may become much more visible as they are multiplied by the conversion. 4K: 4K refers to the resolution of 3840 x 2160 or Ultra High Definition Television (UHDTV). This resolution corresponds to 4 times the resolution of Full HD. To record films with this resolution, special cameras are needed that can record at around 8 megapixels (4K). Full HD: The term Full HD is used to describe devices that can physically display or output HDTV signals in full (1920 x 1080 pixels). 1080p: 1080p is the specification of the vertical picture lines. Among other things, it refers to the resolution 1920 x 1080. The "p" in this case means full frames, so all picture lines are displayed simultaneously. 1080i: 1080i is the specification of the vertical picture lines. The "i" in this case means fields. This signal is usually displayed interpolated (e.g. by devices with a 1280 x 720 HDready resolution). The interpolation digitally adds pixels, but also offers a slight blurring. In contrast, 1080p playback uses full frames.
Diagonal	86"
Aspect Ratio	16:9 Aspect Ratio Format: The projected image is output in a format (aspect ratio) specified by the projector. The format is also determined by the resolution of the projector (see also the entry "Resolution"). The screen format is usually selected on the basis of the format of the beamer image. The most common formats are 4:3, 16:9 and 16:10.
Viewing angle - Horizontal	178° Viewing angle - Horizontal Viewing angle: The viewing angle indicates the distance from the centre line at which the projected image is perceived as being of good quality without restrictions. As a rule, the horizontal viewing angle is specified. A good viewing angle lies within a range of 110 to 130 degrees from the centre of the picture, i.e. 55 to 65 degrees to the left and 65 to the right. If you are outside the viewing angle, the picture deteriorates disproportionately.
Viewing angle - Vertical	178° Viewing angle - Vertical Viewing angle: The viewing angle indicates the distance from the centre line at which the projected image is perceived as being of good quality without restrictions. As a rule, the horizontal viewing angle is specified. A good viewing angle lies within a range of 110 to 130 degrees from the centre of the picture, i.e. 55 to 65 degrees to the left and 65 to the right. If you are outside the viewing angle, the picture deteriorates disproportionately.
Max. Brightness	700 cd/m²
run-time	24/7
Response time	8ms
Refresh Rate	60Hz
Support - VESA	600 x 400
Frame width	15.5 mm
Inputs	1x 3,5mm Jack , 1x RS232 , 1x USB-C , 1x VGA , 2x USB-A , 3x HDMI Inputs HDMI: Digital connection for the transmission of picture & sound. Necessary for high-resolution picture quality (HDTV). Since HDMI 1.4 (High Speed) suitable for transmission of 3D content in Full HD. For high-resolution picture quality in UHD, 4K or HDR, the connection via HDMI 2.0a and higher is suitable. HDMI 2.1 or higher should be used from 120Hz refresh rate in 4K. VGA: The VGA connector is a 15-pin connector for analogue image transmission. It is also called DSub15 and is often found on notebooks and PCs. Compared to the other analogue connections, it offers good picture quality. It can be screwed to the input or output device and can be adapted to YUV with a suitable configuration. DisplayPort: The DisplayPort connection is a VESA-standardised connection for the transmission of image and sound data. In addition to HDCP encryption, DPCP is also supported. Due to its compact size, the connection is most commonly used in notebooks. An extra small variant is the MiniDisplayPort, which is used especially with Apple devices. DVI: DVI (Digital Visual Interface) is an interface for the transmission of video data. Only analogue signals can be transmitted via DVi-A, only digital signals via DVI-D and both types of signals via DVI-I. USB: USB (Universal Serial Bus) is used to control and manage the projector (USB-B). With some business devices, office files and images can also be presented directly with a USB stick or a mouse can be connected via the USB input (USB-A). Toslink: The Toslink connection is an optical signal connection that works on an optical fibre basis. It is used for the digital transmission of audio signals. The optical design offers a lower susceptibility to interference from external magnetic and electrical influences. The connection is mostly used in the area of DVD / Blu-ray players and comparable devices in connection with an AV receiver, if these work with dts or Dolby Digital signals. YUV: The YUV connection, also called Y Cb/Pb Cr/Pr or component connection, is an analogue video connection with three channels (light intensity and two colour channels). Qualitatively, it is the best analogue video connection. Component cable: The YUV connector transmits analogue signals over three cables (Y=black and white UV=colours). YUV is used to transmit HDTV and is compatible with Cinch, for example. S-Video: The S-Video connection is also called S-VHS or Hosiden connection. Compared to the Cinch video connection, it works with two channels (brightness/colour). In terms of quality, it is somewhat better than the Cinch video connection, but there are also limitations. These can be explained by the susceptibility of the signal, which is reflected in picture distortions, for example. Cinch: The cinch video connection is also called composite connection. To make it easier to recognise, it is usually sheathed in yellow. Since the transmission is only via one channel, the picture quality is on a low level. D-Sub15: The VGA connector is a 15-pin connector for image transmission on an analogue basis. It is also called DSub15 and is often found on notebooks and PCs. Compared to the other analogue connectors, it offers good picture quality. It can be screwed to the input or output device and can be adapted to YUV with a suitable configuration. RS232: The RS232 interface can be used to control or manage the projector. Mini Jack: With a single-pin Mini Jack, mono audio signals can be transmitted, with a two-pin stereo audio signals and with a three-pin stereo audio signals and image data can be transmitted. Scart: Scart is a connector that can be used to transmit analogue audio and video signals. It is compatible with other analogue connections such as RCA or S-Video. ARC: The audio return channel, also called ARC or audio return channel, was introduced with HDMI version 1.4 to reduce the amount of cabling between HDMI components. The audio return channel runs via the existing HDMI cable. Therefore, an additional cable for the sound no longer needs to be connected. However, both devices must support ARC. All audio file formats that are also transmitted via the SPDIF interface can be transmitted via the audio return channel. These include Dolby Digital, Digital Theatre Sound and PCM audio. As an example, a connection between a TV (including receiver) and an AV receiver could be made via an HDMI cable. The sound from the TV is fed back via the HDMI cable. Previously, an additional digital cable (coaxial or Tos-Link) was required for the audio signals.
Outputs	1x 3,5mm Jack Outputs HDMI: Digital connection for the transmission of picture & sound. Necessary for high-resolution picture quality (HDTV). Since HDMI 1.4 (High Speed) suitable for transmission of 3D content in Full HD. For high-resolution picture quality in UHD, 4K or HDR, the connection via HDMI 2.0a and higher is suitable. HDMI 2.1 or higher should be used from 120Hz refresh rate in 4K. VGA: The VGA connector is a 15-pin connector for analogue image transmission. It is also called DSub15 and is often found on notebooks and PCs. Compared to the other analogue connections, it offers good picture quality. It can be screwed to the input or output device and can be adapted to YUV with a suitable configuration. DisplayPort: The DisplayPort connection is a VESA-standardised connection for the transmission of image and sound data. In addition to HDCP encryption, DPCP is also supported. Due to its compact size, the connection is most commonly used in notebooks. An extra small variant is the MiniDisplayPort, which is used especially with Apple devices. DVI: DVI (Digital Visual Interface) is an interface for the transmission of video data. Only analogue signals can be transmitted via DVi-A, only digital signals via DVI-D and both types of signals via DVI-I. USB: USB (Universal Serial Bus) is used to control and manage the projector (USB-B). With some business devices, office files and images can also be presented directly with a USB stick or a mouse can be connected via the USB input (USB-A). Toslink: The Toslink connection is an optical signal connection that works on an optical fibre basis. It is used for the digital transmission of audio signals. The optical design offers a lower susceptibility to interference from external magnetic and electrical influences. The connection is mostly used in the area of DVD / Blu-ray players and comparable devices in connection with an AV receiver, if these work with dts or Dolby Digital signals. YUV: The YUV connection, also called Y Cb/Pb Cr/Pr or component connection, is an analogue video connection with three channels (light intensity and two colour channels). Qualitatively, it is the best analogue video connection. Component cable: The YUV connector transmits analogue signals over three cables (Y=black and white UV=colours). YUV is used to transmit HDTV and is compatible with Cinch, for example. S-Video: The S-Video connection is also called S-VHS or Hosiden connection. Compared to the Cinch video connection, it works with two channels (brightness/colour). In terms of quality, it is somewhat better than the Cinch video connection, but there are also limitations. These can be explained by the susceptibility of the signal, which is reflected in picture distortions, for example. Cinch: The cinch video connection is also called composite connection. To make it easier to recognise, it is usually sheathed in yellow. Since the transmission is only via one channel, the picture quality is on a low level. D-Sub15: The VGA connector is a 15-pin connector for image transmission on an analogue basis. It is also called DSub15 and is often found on notebooks and PCs. Compared to the other analogue connectors, it offers good picture quality. It can be screwed to the input or output device and can be adapted to YUV with a suitable configuration. RS232: The RS232 interface can be used to control or manage the projector. Mini Jack: With a single-pin Mini Jack, mono audio signals can be transmitted, with a two-pin stereo audio signals and with a three-pin stereo audio signals and image data can be transmitted. Scart: Scart is a connector that can be used to transmit analogue audio and video signals. It is compatible with other analogue connections such as RCA or S-Video. ARC: The audio return channel, also called ARC or audio return channel, was introduced with HDMI version 1.4 to reduce the amount of cabling between HDMI components. The audio return channel runs via the existing HDMI cable. Therefore, an additional cable for the sound no longer needs to be connected. However, both devices must support ARC. All audio file formats that are also transmitted via the SPDIF interface can be transmitted via the audio return channel. These include Dolby Digital, Digital Theatre Sound and PCM audio. As an example, a connection between a TV (including receiver) and an AV receiver could be made via an HDMI cable. The sound from the TV is fed back via the HDMI cable. Previously, an additional digital cable (coaxial or Tos-Link) was required for the audio signals.
Features	HDMI-CEC , Integrated media player , Integrated speaker , Portrait Mode
Product width	192.9 cm
Product height	110 cm
Product depth	7 cm
Weight	50.7 kg
Colour	Black
EEK Spectrum	A to G
Delivery contents	Power cable , Remote control
Condition	New
Warranty	36 Month
Warranty type	Onsite Repair Service and support information

Manufacturer's warranty information:
Here you will find more detailed information on the different types of warranty. Please refer to our manufacturer overview for contact details and warranty conditions for the corresponding warranty claim. Statutory warranty rights are not restricted by an additional manufacturer's warranty. Our liability for defects is governed by law. Defect rights can be claimed free of charge.