PureLink HDMI / Mini HDMI Cable - Cinema Series 1.50 m

Product information

Professional Quality With a PureLink product you always opt for first-class professional quality. PureLink HDMI cables meet the challenge to transfer perfectly even at the highest data rate pictures and sound. Our HDMI cables are optimized to the requirements of HDTV , so no pixel errors are to be expected. High quality materials and triple shielding A high-purity semiconductor technology and a triple shielding create in this PureLink cables, the best condition for an error - and interference-free signal transmission. The snug-fitting plugs are 24kt gold plated and thus ensure a perfect connection. The latest generation The high-quality PureLink HDMI cable Cinema Series comply with the latest HDMI specification , for as soon as there are new features or updates, they can be implemented immediately by PureLink . This cable conforms to the latest standard , HDMI High Speed with Ethernet Channel . The original names , such as HDMI 2.0 do not describe a new cable type and are therefore no longer allowed, but the cables of Cinema series meet the standards of this new standard . High Speed HDMI with Ethernet Channel The latest HDMI standard is a true all-rounder. The most important innovations are the extended bandwidth of 18 gigabytes per second and thus more achievable resolutions up to 4096x2160p at 60Hz as well as the first time to support up to 32 audio channels at 1536kHz . Furthermore, the new generation also natively supports the first 21:9 cinema format and offers a direct synchronization of video and audio stream. Enormously increased bandwidth The bandwidth of the previous HDMI 1.4 standard has been increased with this latest version 2.0 significantly from 10.2 to 18 gigabytes per second. This is of particular importance to the transfer meeting of extremely high-resolution video data at 60Hz refresh rate . The PureLink Cinema Series supports this new standard and is future-proof . HDMI Ethernet Channel The Ethernet channel on the HDMI cable is a new feature of the HDMI 1.4 standards. With the Ethernet Channel , IP -based entertainment devices such as TVs, set-top boxes and game consoles are used in the home network and can therefore be used also as the Internet , without requiring additional cabling is required. HDMI Audio Return Channel The also ARC or Audio Return Channel named audio return channel , we replaced the Ethernet Channel another cable for home cinema use . The return channel sends the digital audio signal on demand via the HDMI cable back to the AV receiver. This saves the connection with a separate Toslink cable. Supports all 3D TV technologies The TV manufacturers use various technologies to create 3D content via HDMI to the TV play . The PureLink HDMI cable of Cinema series support all currently available 3D TV technologies . backward compatible This PureLink HDMI cable is backwards compatible with all previous HDMI versions . So you need not worry that support HDMI versions to be connected devices you have . Recommended Use Ideal for connecting two HDMI devices with HDMI-A ports. For example, PC, DVD, Blu-ray, Playstation3 , Playstation4 , Xbox360, Xbox One to LCD TV, LED TV, plasma, projector , projector . This cable supports all HDMI versions . Transmitting audio and video data Optimized for digital HDTV signals - FullHD 1080p, 1440p , 1600p , 2160p/60Hz , 4Kx2K . With Deep Color and x.v.Color . Transfers all data from the HDMI CEC protocol such as , HDCP and EDID . Transfers all digital audio formats such as 7.1 , DTS-HD Mater Audio , Dolby TrueHD, Dolby Digital, DTS, DVD Audio , LPCM , SACD, MPCM . Up to 32 channels of audio at 1536 kHz.

Technical data

Name	PureLink HDMI / Mini HDMI Cable - Cinema Series 1.50 m
Article number	1920387
GTIN/EAN	4260134122054
Manufacturer SKU	CS1100-015
Model name	CS1100-015
Brand	Purelink
Product Type	HDMI cable
Inputs	1x HDMI Inputs HDMI: Digital connection for the transmission of picture & sound. Necessary for high-resolution picture quality (HDTV). Since HDMI 1.4 (High Speed) suitable for transmission of 3D content in Full HD. For high-resolution picture quality in UHD, 4K or HDR, the connection via HDMI 2.0a and higher is suitable. HDMI 2.1 or higher should be used from 120Hz refresh rate in 4K. VGA: The VGA connector is a 15-pin connector for analogue image transmission. It is also called DSub15 and is often found on notebooks and PCs. Compared to the other analogue connections, it offers good picture quality. It can be screwed to the input or output device and can be adapted to YUV with a suitable configuration. DisplayPort: The DisplayPort connection is a VESA-standardised connection for the transmission of image and sound data. In addition to HDCP encryption, DPCP is also supported. Due to its compact size, the connection is most commonly used in notebooks. An extra small variant is the MiniDisplayPort, which is used especially with Apple devices. DVI: DVI (Digital Visual Interface) is an interface for the transmission of video data. Only analogue signals can be transmitted via DVi-A, only digital signals via DVI-D and both types of signals via DVI-I. USB: USB (Universal Serial Bus) is used to control and manage the projector (USB-B). With some business devices, office files and images can also be presented directly with a USB stick or a mouse can be connected via the USB input (USB-A). Toslink: The Toslink connection is an optical signal connection that works on an optical fibre basis. It is used for the digital transmission of audio signals. The optical design offers a lower susceptibility to interference from external magnetic and electrical influences. The connection is mostly used in the area of DVD / Blu-ray players and comparable devices in connection with an AV receiver, if these work with dts or Dolby Digital signals. YUV: The YUV connection, also called Y Cb/Pb Cr/Pr or component connection, is an analogue video connection with three channels (light intensity and two colour channels). Qualitatively, it is the best analogue video connection. Component cable: The YUV connector transmits analogue signals over three cables (Y=black and white UV=colours). YUV is used to transmit HDTV and is compatible with Cinch, for example. S-Video: The S-Video connection is also called S-VHS or Hosiden connection. Compared to the Cinch video connection, it works with two channels (brightness/colour). In terms of quality, it is somewhat better than the Cinch video connection, but there are also limitations. These can be explained by the susceptibility of the signal, which is reflected in picture distortions, for example. Cinch: The cinch video connection is also called composite connection. To make it easier to recognise, it is usually sheathed in yellow. Since the transmission is only via one channel, the picture quality is on a low level. D-Sub15: The VGA connector is a 15-pin connector for image transmission on an analogue basis. It is also called DSub15 and is often found on notebooks and PCs. Compared to the other analogue connectors, it offers good picture quality. It can be screwed to the input or output device and can be adapted to YUV with a suitable configuration. RS232: The RS232 interface can be used to control or manage the projector. Mini Jack: With a single-pin Mini Jack, mono audio signals can be transmitted, with a two-pin stereo audio signals and with a three-pin stereo audio signals and image data can be transmitted. Scart: Scart is a connector that can be used to transmit analogue audio and video signals. It is compatible with other analogue connections such as RCA or S-Video. ARC: The audio return channel, also called ARC or audio return channel, was introduced with HDMI version 1.4 to reduce the amount of cabling between HDMI components. The audio return channel runs via the existing HDMI cable. Therefore, an additional cable for the sound no longer needs to be connected. However, both devices must support ARC. All audio file formats that are also transmitted via the SPDIF interface can be transmitted via the audio return channel. These include Dolby Digital, Digital Theatre Sound and PCM audio. As an example, a connection between a TV (including receiver) and an AV receiver could be made via an HDMI cable. The sound from the TV is fed back via the HDMI cable. Previously, an additional digital cable (coaxial or Tos-Link) was required for the audio signals.
Outputs	1x Mini-HDMI Outputs HDMI: Digital connection for the transmission of picture & sound. Necessary for high-resolution picture quality (HDTV). Since HDMI 1.4 (High Speed) suitable for transmission of 3D content in Full HD. For high-resolution picture quality in UHD, 4K or HDR, the connection via HDMI 2.0a and higher is suitable. HDMI 2.1 or higher should be used from 120Hz refresh rate in 4K. VGA: The VGA connector is a 15-pin connector for analogue image transmission. It is also called DSub15 and is often found on notebooks and PCs. Compared to the other analogue connections, it offers good picture quality. It can be screwed to the input or output device and can be adapted to YUV with a suitable configuration. DisplayPort: The DisplayPort connection is a VESA-standardised connection for the transmission of image and sound data. In addition to HDCP encryption, DPCP is also supported. Due to its compact size, the connection is most commonly used in notebooks. An extra small variant is the MiniDisplayPort, which is used especially with Apple devices. DVI: DVI (Digital Visual Interface) is an interface for the transmission of video data. Only analogue signals can be transmitted via DVi-A, only digital signals via DVI-D and both types of signals via DVI-I. USB: USB (Universal Serial Bus) is used to control and manage the projector (USB-B). With some business devices, office files and images can also be presented directly with a USB stick or a mouse can be connected via the USB input (USB-A). Toslink: The Toslink connection is an optical signal connection that works on an optical fibre basis. It is used for the digital transmission of audio signals. The optical design offers a lower susceptibility to interference from external magnetic and electrical influences. The connection is mostly used in the area of DVD / Blu-ray players and comparable devices in connection with an AV receiver, if these work with dts or Dolby Digital signals. YUV: The YUV connection, also called Y Cb/Pb Cr/Pr or component connection, is an analogue video connection with three channels (light intensity and two colour channels). Qualitatively, it is the best analogue video connection. Component cable: The YUV connector transmits analogue signals over three cables (Y=black and white UV=colours). YUV is used to transmit HDTV and is compatible with Cinch, for example. S-Video: The S-Video connection is also called S-VHS or Hosiden connection. Compared to the Cinch video connection, it works with two channels (brightness/colour). In terms of quality, it is somewhat better than the Cinch video connection, but there are also limitations. These can be explained by the susceptibility of the signal, which is reflected in picture distortions, for example. Cinch: The cinch video connection is also called composite connection. To make it easier to recognise, it is usually sheathed in yellow. Since the transmission is only via one channel, the picture quality is on a low level. D-Sub15: The VGA connector is a 15-pin connector for image transmission on an analogue basis. It is also called DSub15 and is often found on notebooks and PCs. Compared to the other analogue connectors, it offers good picture quality. It can be screwed to the input or output device and can be adapted to YUV with a suitable configuration. RS232: The RS232 interface can be used to control or manage the projector. Mini Jack: With a single-pin Mini Jack, mono audio signals can be transmitted, with a two-pin stereo audio signals and with a three-pin stereo audio signals and image data can be transmitted. Scart: Scart is a connector that can be used to transmit analogue audio and video signals. It is compatible with other analogue connections such as RCA or S-Video. ARC: The audio return channel, also called ARC or audio return channel, was introduced with HDMI version 1.4 to reduce the amount of cabling between HDMI components. The audio return channel runs via the existing HDMI cable. Therefore, an additional cable for the sound no longer needs to be connected. However, both devices must support ARC. All audio file formats that are also transmitted via the SPDIF interface can be transmitted via the audio return channel. These include Dolby Digital, Digital Theatre Sound and PCM audio. As an example, a connection between a TV (including receiver) and an AV receiver could be made via an HDMI cable. The sound from the TV is fed back via the HDMI cable. Previously, an additional digital cable (coaxial or Tos-Link) was required for the audio signals.
Cable length	1.5 m
Colour	Black
Condition	New
Warranty	24 Month
Warranty type	Bringin service Service and support information

Manufacturer's warranty information:
Here you will find more detailed information on the different types of warranty. Please refer to our manufacturer overview for contact details and warranty conditions for the corresponding warranty claim. Statutory warranty rights are not restricted by an additional manufacturer's warranty. Our liability for defects is governed by law. Defect rights can be claimed free of charge.

Product safety

Person responsible for the EU
PureLink GmbH
Von-Liebig-Str. 10
48432 Rheine
Germany


info@purelink.de