Vision TC3 AMP amplifier
Product information
SnapshotTC3-AMP> Extremely small 2 x 25 w (RMS) at 8 ohms Digital Amp> 2 x Stereo inputs (Input 1 duplicated on front and rear)> IR Remote control included
DetailsBy using latest low-impedance digital amplifier chip technology the new Techconnect Amp module outputs a massive 2 x 25 watts RMS (at 8 ohms) but fits into the space of a Techconnect module.
Front Panel InputTwo Inputs are wired into the rear with removable phoenix connectors, but Input 1 is also duplicated on the front panel with a minijack socket for convenience. This “half-normalled” input disconnects the rear terminal while in use.
D-Class AmplifierDigital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary
Power Four SpeakersDon’t let size deceive you: the Techconnect Amp can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers).
Preset MemoryBy default when power is activated the Techconnect Amp turns on and resumes the most recent settings. For hospitality applications it can be set to return to a preset input and level whenever it is powered on – for example in hotel guest rooms.
Tactile DialA simple clear control interface makes the product easy to use long press on the dial to power on and off. Short press to change input.
Remote ControlA remote control is included and IR receivers are positioned on the front and rear for integration with a control system such as the Techconnect Control. Note: there is no tone control with this amplifier. Vision’s spare remote controls have tone buttons but they do not work with this product.
Easy to Install and UninstallTC3-AMP_rear_angleA robust module that is easy to install or remove and disconnect from the front. Removable phoenix connectors allow non-technical end users to uninstall it very easily if required.
Cables IncludedSpeaker cable is included plus short input cables are included for connection to the rear of adjacent input modules on the Techconnect.
SecureIdeal when you don’t have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft.
TC3-AMP_rear_angle_without_backboxClose at HandCan be positioned anywhere in the room making it perfect for training rooms, boardrooms, and classrooms.
Integrated Techconnect FamilyIncluded is a single-gang backbox and surround, or alternatively you can mount it in a double-gang surround with other Techconnect modules.
DetailsBy using latest low-impedance digital amplifier chip technology the new Techconnect Amp module outputs a massive 2 x 25 watts RMS (at 8 ohms) but fits into the space of a Techconnect module.
Front Panel InputTwo Inputs are wired into the rear with removable phoenix connectors, but Input 1 is also duplicated on the front panel with a minijack socket for convenience. This “half-normalled” input disconnects the rear terminal while in use.
D-Class AmplifierDigital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary
Power Four SpeakersDon’t let size deceive you: the Techconnect Amp can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers).
Preset MemoryBy default when power is activated the Techconnect Amp turns on and resumes the most recent settings. For hospitality applications it can be set to return to a preset input and level whenever it is powered on – for example in hotel guest rooms.
Tactile DialA simple clear control interface makes the product easy to use long press on the dial to power on and off. Short press to change input.
Remote ControlA remote control is included and IR receivers are positioned on the front and rear for integration with a control system such as the Techconnect Control. Note: there is no tone control with this amplifier. Vision’s spare remote controls have tone buttons but they do not work with this product.
Easy to Install and UninstallTC3-AMP_rear_angleA robust module that is easy to install or remove and disconnect from the front. Removable phoenix connectors allow non-technical end users to uninstall it very easily if required.
Cables IncludedSpeaker cable is included plus short input cables are included for connection to the rear of adjacent input modules on the Techconnect.
SecureIdeal when you don’t have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft.
TC3-AMP_rear_angle_without_backboxClose at HandCan be positioned anywhere in the room making it perfect for training rooms, boardrooms, and classrooms.
Integrated Techconnect FamilyIncluded is a single-gang backbox and surround, or alternatively you can mount it in a double-gang surround with other Techconnect modules.
Technical data
| Name | Vision TC3 AMP amplifier |
|---|---|
| Article number | 2660330 |
| GTIN/EAN | 3446595000006 |
| Manufacturer SKU | TC3-AMP |
| Brand | Vision |
| Product width | 21 cm |
| Product height | 24 cm |
| Product depth | 7 cm |
| Weight | 1 kg |
| Condition | New |
| Warranty type | Bringin service Service and support information |
Manufacturer's warranty information:
Here you will find more detailed information on the different types of warranty. Please refer to our manufacturer overview for contact details and warranty conditions for the corresponding warranty claim. Statutory warranty rights are not restricted by an additional manufacturer's warranty. Our liability for defects is governed by law. Defect rights can be claimed free of charge.